Applied Logic Engineering NavDive Guida Utente

1 Diver Navigation System User’s Guide

10 9) Since this is the first dive of the day, you can simply press the ENTER switch. If this happened to be your second or third dive of the da

11 Saving an underwater position to memory One of the most useful features of NavDive is the ability to save your current GPS position (latitude and

12 To activate tracking mode: 1) From the HOME SCREEN, press the DOWN switch three times. The LCD should then display: Track Position? Y 2) Pre

13 Y 2) Press the ENTER switch to end the dive. NavDive when then display the Main Menu screen. 3) To cancel the END DIVE function, press the R

14 Advanced Use While the basic functions of NavDive are useful, the real power of the system is in its advanced features. The next section will de

15 5) To save your current position as your entry point, press the RIGHT switch to display “Y” on the LCD, then press the ENTER switch to save to me

16 1. To configure NavDive at the start of the dive in which you are expecting to navigate to the target locations you loaded, select PRE DIVE from

17 Once the dive is underway, you can navigate to any of the specific target locations that are included in the destination file that was selected at

18 Maintain your heading by matching the current heading to the target heading to reach your target. Canceling the navigation function You can cancel

19

2 Copyright 2014 Applied Logic Engineering, Inc. All rights reserved. Statement of Liability Our products and services are provided "as is&qu

20 Working with NavDive data All data collected during your dive is stored on a removable SD memory card so that it can be easily transferred to a

21 C:\NavDive \Destinations \SavedPaths \Saved Positions Descriptions.txt [You may also copy the files into these folders from the SD Card as

22 Once you have properly configured the SD Card for use, you can close the NavDive Log application, remove the SD Card from your PC, and insert it

23  View Saved Positions by Dive – select this option to review the saved positions you created for each dive made. You can view the infor

24 Any of the items from a particular dive can also be individually selected and saved to any location file for future dives. Click on the selector

25  View Position Tracking by Dive – choose this option to review your saved dive tracking file for any dive. This information can be display

26

27 Appendix A : File Format NavDive stores its files in a particular format on the SD memory card. This next section describes the file structure an

28 Record format – DDMMYY, HHMMSS,Desc,N or S, Lat coords, E or W, Long coords <crlf> Example : 040913,025111.000,Plane,N,4507.5022,W,09326.73

3 Table of Contents Introduction to NavDive……………………………………………………………………………………………………….. 3 Description of the System GPS Receiver………………………………………………………

4 Introduction to NavDive Congratulations on your purchase of NavDive! You will find that NavDive is a useful tool that is fun to use, extending yo

5 Description of the System NavDive consists of two main components -- a surface deployed GPS receiver / transmitter that receives a GPS fix and t

6 console shows current position, navigation information, or other unit status in real time as the dive is conducted. With this unit, the diver can

7 Location of Power switch Cursor (Up/Down) -- this switch is used to move through the menuing system of NavDive Option (left/right) – this switc

8 User interface controls (Up/Down, Left/Right, and ENTER)

9 Starting Out – Using NavDive for the first time This section will cover the basic operation of NavDive using a few of the key features. It will